Skip to content

Orange Police Frequencies

We do not have frequencies listed specifically for Orange in Noble County, Indiana yet. Countywide channels for Noble County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Kendallville (Indiana Project Hoosier SAFE-T), about 7 miles away.

About Orange Police Frequencies

  • 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
  • 1 conventional channel uses a digital mode (NXDN48), which needs a scanner that decodes that mode.
  • Trunked radio systems that carry law-enforcement traffic here: Indiana Project Hoosier SAFE-T: 5 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Orange, start with the Kendallville site of Indiana Project Hoosier SAFE-T, about 7 miles away. Its control channels: 853.9875, 857.2625 MHz.
  • 1 listed entry is marked encrypted. No scanner can decode encrypted audio.

Noble County channels that also cover Orange

Dispatch

Dispatch frequencies for Noble County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Noble County Sheriff BackupNoble County Sheriff – Dispatch154.7400
In 156.0900
103.5 PLFMNKSB697

Jails & Corrections

Jails & Corrections frequencies for Noble County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Noble County SheriffCounty Jail156.2400NXDN48KSB697

Indiana Project Hoosier SAFE-T

Indiana Project Hoosier SAFE-T talkgroups
AgencyDescriptionTalkgroupHexMode
Noble County SheriffNoble County Sheriff – Dispatch120922f3cD
Noble County SheriffTowns Police – Dispatch 1 – Kendallville120932f3dD
Noble County SheriffOperations120962f40D
Noble County SheriffOperations120982f42D
1 encrypted talkgroup (cannot be monitored)
Indiana Project Hoosier SAFE-T encrypted talkgroups
AgencyDescriptionTalkgroupHexMode
Noble County SheriffOperations120972f41D Encrypted

Nearest trunked radio sites

Distances are measured from the center of Orange.

Kendallville · Indiana Project Hoosier SAFE-T
RFSS 1 · Site 20 (hex 14) · NAC 6BA · about 7 mi away
Control 853.9875, 857.2625
Voice 851.425, 851.9625, 852.475, 852.9
Lagrange · Indiana Project Hoosier SAFE-T
RFSS 1 · Site 42 (hex 2A) · NAC 6BB · about 11 mi away
Control 853.225, 853.425
Voice 851.2375, 851.7125, 851.8625, 852.8625
Ligonier · Indiana Project Hoosier SAFE-T
RFSS 1 · Site 43 (hex 2B) · NAC 6B3 · about 12 mi away
Control 853.4875, 855.2375
Voice 851.05, 851.4875, 852.2, 852.5375
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.