About White Post Police Frequencies
- 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry law-enforcement traffic here: Indiana Project Hoosier SAFE-T: 3 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For White Post, start with the Medaryville site of Indiana Project Hoosier SAFE-T, about 7 miles away. Its control channels: 853.425, 853.925 MHz.
Pulaski County channels that also cover White Post
Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Pulaski County Law Enforcement | Plan A Car-to-Base | 154.8900 | FMN | KSD283 | |
| Pulaski County Law Enforcement | Plan A Base-to-Car | 155.1300 | FMN | KSD283 |
Indiana Project Hoosier SAFE-T
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Pulaski County Sheriff | Pulaski County Sheriff – Dispatch | 12145 | 2f71 | D |
| Pulaski County Sheriff | Pulaski County Sheriff – Tactical Channel | 12152 | 2f78 | D |
| Pulaski County Sheriff | Car to Car | 12142 | 2f6e | D |
Nearest trunked radio sites
Distances are measured from the center of White Post.
Medaryville · Indiana Project Hoosier SAFE-T
RFSS 1 · Site 17 (hex 11) · NAC 6B7 · about 7 mi away
Control 853.425, 853.925
Voice 851.425, 851.925, 852.925
Rensselaer · Indiana Project Hoosier SAFE-T
RFSS 1 · Site 91 (hex 5B) · NAC 6BF · about 13 mi away
Control 854.9875, 859.9375
Voice 851.625, 852.75, 853.65
Winamac · Indiana Project Hoosier SAFE-T
RFSS 1 · Site 62 (hex 3E) · NAC 6B2 · about 14 mi away
Control 858.4875, 858.6625
Voice 853.3625, 856.4875, 858.2625
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.