Skip to content

Walker Police Frequencies

We do not have frequencies listed specifically for Walker in Rush County, Indiana yet. Countywide channels for Rush County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Rushville (Indiana Project Hoosier SAFE-T), about 7 miles away.

About Walker Police Frequencies

  • 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry law-enforcement traffic here: Indiana Project Hoosier SAFE-T: 3 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Walker, start with the Rushville site of Indiana Project Hoosier SAFE-T, about 7 miles away. Its control channels: 852.9625, 853.4625 MHz.

Rush County channels that also cover Walker

Dispatch

Dispatch frequencies for Rush County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Rush County SheriffRush County Sheriff – Dispatch155.6250
In 154.6500
179.9 PLFMNWZX813

Tactical

Tactical frequencies for Rush County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Rush County SheriffSheriff/Rushville Police158.8200FMNWZX813

Indiana Project Hoosier SAFE-T

Indiana Project Hoosier SAFE-T talkgroups
AgencyDescriptionTalkgroupHexMode
Rush County SheriffRush County Sheriff – Dispatch121852f99D
Rush County SheriffRush County Sheriff – Tactical Channel121862f9aD
Rush County SheriffCar-to-Car121842f98D

Nearest trunked radio sites

Distances are measured from the center of Walker.

Rushville · Indiana Project Hoosier SAFE-T
RFSS 1 · Site 76 (hex 4C) · NAC 6B9 · about 7 mi away
Control 852.9625, 853.4625
Voice 851.4875, 851.9625, 852.4625
Shelby Co Simulcast · Indiana Project Hoosier SAFE-T
RFSS 1 · Site 5 (hex 5) · NAC 6B5 · about 12 mi away
Control 851.9375, 853.9375
Voice 851.0625, 851.4375, 852.0625, 852.3125, 852.75, 853.75
Knightstown · Indiana Project Hoosier SAFE-T
RFSS 1 · Site 94 (hex 5E) · NAC 6B4 · about 16 mi away
Control 774.43125, 774.68125
Voice 769.81875, 770.26875, 770.81875, 771.54375
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency do the police use in Walker?

We do not have a dispatch channel listed specifically for Walker. County-level dispatch channels in the same county: Rush County Sheriff 155.6250 MHz (179.9 PL).