Skip to content

Liberty Police Frequencies

We do not have frequencies listed specifically for Liberty in Shelby County, Indiana yet. Countywide channels for Shelby County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Shelby Co Simulcast (Indiana Project Hoosier SAFE-T), about 8 miles away.

About Liberty Police Frequencies

  • 4 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry law-enforcement traffic here: Indiana Project Hoosier SAFE-T: 3 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Liberty, start with the Shelby Co Simulcast site of Indiana Project Hoosier SAFE-T, about 8 miles away. Its control channels: 851.9375, 853.9375 MHz.

Shelby County channels that also cover Liberty

Tactical

AgencyDescriptionFrequency (MHz)ToneModeFCC
Shelby County SheriffBaliffs151.040088.5 PLFMNWPNR618
Shelby County SheriffShelby County Sheriff – Tactical Channel151.1000FMNKFY453
Shelby County SheriffShelby County Sheriff – Tactical Channel151.3250186.2 PLFMNWPQB828

Jails & Corrections

AgencyDescriptionFrequency (MHz)ToneModeFCC
Shelby County SheriffCounty Jail158.8500131.8 PLFMNWPQB828

Indiana Project Hoosier SAFE-T

AgencyDescriptionTalkgroupHexMode
Shelby County SheriffShelby County Sheriff – Dispatch122192fbbD
Shelby County SheriffCounty Court Bailiffs122012fa9D
Shelby County SheriffCounty Jail Operations122072fafD

Nearest trunked radio sites

Distances are measured from the center of Liberty.

Shelby Co Simulcast · Indiana Project Hoosier SAFE-T
RFSS 1 · Site 5 (hex 5) · NAC 6B5 · about 8 mi away
Control 851.9375, 853.9375
Voice 851.0625, 851.4375, 852.0625, 852.3125, 852.75, 853.75
Greensburg · Indiana Project Hoosier SAFE-T
RFSS 2 · Site 46 (hex 2E) · NAC 6B4 · about 14 mi away
Control 852.9125, 853.4125
Voice 851.4125, 851.9125, 853.1875
Rushville · Indiana Project Hoosier SAFE-T
RFSS 1 · Site 76 (hex 4C) · NAC 6B9 · about 15 mi away
Control 852.9625, 853.4625
Voice 851.4875, 851.9625, 852.4625
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.