About Jennings Police Frequencies
- 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
- 1 conventional channel uses a digital mode (NXDN48), which needs a scanner that decodes that mode.
- Trunked radio systems that carry law-enforcement traffic here: Indiana Project Hoosier SAFE-T: 6 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Jennings, start with the Henryville site of Indiana Project Hoosier SAFE-T, about 14 miles away. Its control channels: 854.0375, 854.2375, 854.4125 MHz.
- 1 listed entry is marked encrypted. No scanner can decode encrypted audio.
Scott County channels that also cover Jennings
Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Scott County Sheriff | Scott County Sheriff – Dispatch | 155.6925 In 151.3325 | RAN 17 | NXDN48 Encrypted | KNFL239 |
Jails & Corrections
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Scott County Sheriff | Jail Operations | 460.2750 In 465.2750 | FMN | KNFL239 |
Indiana Project Hoosier SAFE-T
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Scott County Sheriff | Scott County Sheriff – Dispatch | 21624 | 5478 | D |
| Scott County Sheriff | Operations | 21629 | 547d | D |
| Scott County Sheriff | Operations | 21630 | 547e | D |
| Scott County Sheriff | Operations | 21631 | 547f | D |
| Scott County Sheriff | Operations | 21632 | 5480 | D |
| Scott County Sheriff | Scott County Sheriff – Tactical Channel | 21633 | 5481 | D |
Nearest trunked radio sites
Distances are measured from the center of Jennings.
Henryville · Indiana Project Hoosier SAFE-T
RFSS 2 · Site 33 (hex 21) · NAC 6B3 · about 14 mi away
Control 854.0375, 854.2375, 854.4125, 857.7125
Voice 851.425, 851.925, 852.925, 853.425, 853.925
Fleenortown · Indiana Project Hoosier SAFE-T
RFSS 2 · Site 50 (hex 32) · NAC 6B8 · about 14 mi away
Control 853.4625, 855.7125
Voice 851.3125, 851.725, 852.95
Seymour · Indiana Project Hoosier SAFE-T
RFSS 2 · Site 32 (hex 20) · NAC 6B9 · about 15 mi away
Control 853.9125
Voice 851.4625, 852.4125, 852.8875, 853.3625, 856.7125
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency do the police use in Jennings?
We do not have a dispatch channel listed specifically for Jennings. County-level dispatch channels in the same county: Scott County Sheriff 155.6925 MHz (RAN 17).