Skip to content

Blanford Police Frequencies

We do not have frequencies listed specifically for Blanford in Vermillion County, Indiana yet. Countywide channels for Vermillion County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Clinton (Indiana Project Hoosier SAFE-T), about 7 miles away.

About Blanford Police Frequencies

  • 1 conventional channel uses a digital mode (NXDN48), which needs a scanner that decodes that mode.
  • Trunked radio systems that carry law-enforcement traffic here: Indiana Project Hoosier SAFE-T: 5 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Blanford, start with the Clinton site of Indiana Project Hoosier SAFE-T, about 7 miles away. Its control channels: 853.8125, 856.7625, 859.7625 MHz.
  • 1 listed entry is marked encrypted. No scanner can decode encrypted audio.

Vermillion County channels that also cover Blanford

Tactical

AgencyDescriptionFrequency (MHz)ToneModeFCC
Vermillion County SheriffClinton Police – Operations "High Band"151.3025
In 158.9475
RAN 10NXDN48 KSB372

Indiana Project Hoosier SAFE-T

AgencyDescriptionTalkgroupHexMode
Vermillion County SheriffVermillion County Sheriff – Dispatch12382305eD
Vermillion County SheriffTown Marshals (County)12383305fD
Vermillion County SheriffVermillion County Sheriff – Tactical Channel123843060D
Vermillion County SheriffCar-to-Car12381305dD
Vermillion County SheriffJail – Operations (County)12380305cD

Nearest trunked radio sites

Distances are measured from the center of Blanford.

Clinton · Indiana Project Hoosier SAFE-T
RFSS 1 · Site 29 (hex 1D) · NAC 6B6 · about 7 mi away
Control 853.8125, 856.7625, 859.7625
Voice 851.3375, 852.9
Vigo County · Indiana Project Hoosier SAFE-T
RFSS 1 · Site 83 (hex 53) · NAC 6B4 · about 15 mi away
Control 856.7375, 857.7625
Voice 851.1125, 851.575, 852.075, 852.8, 853.0875, 855.9875
Terre Haute · Indiana Project Hoosier SAFE-T
RFSS 1 · Site 30 (hex 1E) · NAC 6BA · about 15 mi away
Control 854.3125, 856.7125, 859.7125
Voice 852.375, 857.7125
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.