About St. Bernice Police Frequencies
- 1 conventional channel uses a digital mode (NXDN48), which needs a scanner that decodes that mode.
- Trunked radio systems that carry law-enforcement traffic here: Indiana Project Hoosier SAFE-T: 5 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For St. Bernice, start with the Clinton site of Indiana Project Hoosier SAFE-T, about 7 miles away. Its control channels: 853.8125, 856.7625, 859.7625 MHz.
- 1 listed entry is marked encrypted. No scanner can decode encrypted audio.
Vermillion County channels that also cover St. Bernice
Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Vermillion County Sheriff | Clinton Police – Operations "High Band" | 151.3025 In 158.9475 | RAN 10 | NXDN48 Encrypted | KSB372 |
Indiana Project Hoosier SAFE-T
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Vermillion County Sheriff | Vermillion County Sheriff – Dispatch | 12382 | 305e | D |
| Vermillion County Sheriff | Town Marshals (County) | 12383 | 305f | D |
| Vermillion County Sheriff | Vermillion County Sheriff – Tactical Channel | 12384 | 3060 | D |
| Vermillion County Sheriff | Car-to-Car | 12381 | 305d | D |
| Vermillion County Sheriff | Jail – Operations (County) | 12380 | 305c | D |
Nearest trunked radio sites
Distances are measured from the center of St. Bernice.
Clinton · Indiana Project Hoosier SAFE-T
RFSS 1 · Site 29 (hex 1D) · NAC 6B6 · about 7 mi away
Control 853.8125, 856.7625, 859.7625
Voice 851.3375, 852.9
INDOC Rockville · Indiana Project Hoosier SAFE-T
RFSS 1 · Site 89 (hex 59) · NAC 6B4 · about 15 mi away
Control 853.2375, 859.5375
Voice 851.175
Newport · Indiana Project Hoosier SAFE-T
RFSS 1 · Site 27 (hex 1B) · NAC 6B2 · about 17 mi away
Control 857.9625, 858.5125, 859.9625
Voice 851.975, 858.9625
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.