Skip to content

Augustine Police Frequencies

We do not have frequencies listed specifically for Augustine in Logan County, Kansas yet. Countywide channels for Logan County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Wallace (Kansas Statewide Interoperable Communication System (KSICS)), about 17 miles away.

About Augustine Police Frequencies

  • 1 conventional channel uses a digital mode (P25), which needs a scanner that decodes that mode.
  • Trunked radio systems that carry law-enforcement traffic here: Kansas Statewide Interoperable Communication System (KSICS): 1 talkgroup. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Augustine, start with the Wallace site of Kansas Statewide Interoperable Communication System (KSICS), about 17 miles away. Its control channels: 852.3125, 852.6125 MHz.

Logan County channels that also cover Augustine

Tactical

AgencyDescriptionFrequency (MHz)ToneModeFCC
Logan County SheriffLogan County Sheriff – Tactical Channel155.7300P25KAJ895

Kansas Statewide Interoperable Communication System (KSICS)

AgencyDescriptionTalkgroupHexMode
Logan County SheriffLogan County Sheriff – Dispatch44051135D

Nearest trunked radio sites

Distances are measured from the center of Augustine.

Wallace · Kansas Statewide Interoperable Communication System (KSICS)
RFSS 2 · Site 38 (hex 26) · NAC 1BA · about 17 mi away
Control 852.3125, 852.6125
Voice 851.6, 852.9375, 853.1875, 853.65
Modoc · Kansas Statewide Interoperable Communication System (KSICS)
RFSS 1 · Site 31 (hex 1F) · NAC 1B6 · about 31 mi away
Control 852.4625, 852.725
Voice 851.8375, 852.975, 853.4, 853.8625
Oakley · Kansas Statewide Interoperable Communication System (KSICS)
RFSS 2 · Site 42 (hex 2A) · NAC 1B6 · about 32 mi away
Control 852.4875, 852.775
Voice 851.7125, 853.075, 853.425, 853.725
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.