Skip to content

Western Police Frequencies

We do not have frequencies listed specifically for Western in Logan County, Kansas yet. Countywide channels for Logan County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Wallace (Kansas Statewide Interoperable Communication System (KSICS)), about 11 miles away.

About Western Police Frequencies

  • 1 conventional channel uses a digital mode (P25), which needs a scanner that decodes that mode.
  • Trunked radio systems that carry law-enforcement traffic here: Kansas Statewide Interoperable Communication System (KSICS): 1 talkgroup. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Western, start with the Wallace site of Kansas Statewide Interoperable Communication System (KSICS), about 11 miles away. Its control channels: 852.3125, 852.6125 MHz.

Logan County channels that also cover Western

Tactical

Tactical frequencies for Logan County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Logan County SheriffLogan County Sheriff – Tactical Channel155.7300P25KAJ895

Kansas Statewide Interoperable Communication System (KSICS)

Kansas Statewide Interoperable Communication System (KSICS) talkgroups
AgencyDescriptionTalkgroupHexMode
Logan County SheriffLogan County Sheriff – Dispatch44051135D

Nearest trunked radio sites

Distances are measured from the center of Western.

Wallace · Kansas Statewide Interoperable Communication System (KSICS)
RFSS 2 · Site 38 (hex 26) · NAC 1BA · about 11 mi away
Control 852.3125, 852.6125
Voice 851.6, 852.9375, 853.1875, 853.65
Oakley · Kansas Statewide Interoperable Communication System (KSICS)
RFSS 2 · Site 42 (hex 2A) · NAC 1B6 · about 30 mi away
Control 852.4875, 852.775
Voice 851.7125, 853.075, 853.425, 853.725
Edson · Kansas Statewide Interoperable Communication System (KSICS)
RFSS 2 · Site 39 (hex 27) · NAC 1B4 · about 32 mi away
Control 852.1125, 852.4125
Voice 851.8, 852.75, 853.475, 853.9
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.