Skip to content

Ellington Police Frequencies

We do not have frequencies listed specifically for Ellington in Dodge County, Minnesota yet. Countywide channels for Dodge County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Dodge - Steele Co. Simulcast (Allied Radio Matrix for Emergency Response (ARMER)), about 9 miles away.

About Ellington Police Frequencies

  • Trunked radio systems that carry law-enforcement traffic here: Allied Radio Matrix for Emergency Response (ARMER): 5 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Ellington, start with the Dodge - Steele Co. Simulcast site of Allied Radio Matrix for Emergency Response (ARMER), about 9 miles away. Its control channels: 854.6375, 858.9375 MHz.

Dodge County channels that also cover Ellington

Allied Radio Matrix for Emergency Response (ARMER)

Allied Radio Matrix for Emergency Response (ARMER) talkgroups
AgencyDescriptionTalkgroupHexMode
Dodge County SheriffLaw Dispatch20604507cD
Dodge County SheriffLaw 220602507aD
Dodge County SheriffLaw Training (1)206335099D
Dodge County SheriffLaw Training (2)20634509aD
Dodge County SheriffJail20605507dD

Nearest trunked radio sites

Distances are measured from the center of Ellington.

Dodge - Steele Co. Simulcast · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 3 · Site 25 (hex 19) · about 9 mi away
Control 854.6375, 858.9375
Voice 851.4, 851.875, 852.375, 853.05, 853.55, 853.85, 854.1125, 854.3875, 856.0125, 857.0375, 857.9375, 859.0375
Faribault - Prison · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 3 · Site 35 (hex 23) · about 17 mi away
Control 858.4375, 859.9375
Voice 856.2375, 856.9375
Goodhue Co. Simulcast · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 3 · Site 40 (hex 28) · about 21 mi away
Control 851.425, 851.4875, 851.975
Voice 851.675, 851.7125, 852.45, 852.75, 852.9, 853.1, 853.4, 853.675, 853.7, 854.3625
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.