Skip to content

Arendahl Police Frequencies

We do not have frequencies listed specifically for Arendahl in Fillmore County, Minnesota yet. Countywide channels for Fillmore County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Troy - Utica (Allied Radio Matrix for Emergency Response (ARMER)), about 7 miles away.

About Arendahl Police Frequencies

  • 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry law-enforcement traffic here: Allied Radio Matrix for Emergency Response (ARMER): 2 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Arendahl, start with the Troy - Utica site of Allied Radio Matrix for Emergency Response (ARMER), about 7 miles away. Its control channels: 855.4625 MHz.

Fillmore County channels that also cover Arendahl

Dispatch

Dispatch frequencies for Fillmore County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Fillmore County SheriffFillmore County Sheriff – Dispatch154.8750
In 158.9700
110.9 PLFMNWPVZ365

Allied Radio Matrix for Emergency Response (ARMER)

Allied Radio Matrix for Emergency Response (ARMER) talkgroups
AgencyDescriptionTalkgroupHexMode
Fillmore County SheriffLaw Dispatch208205154D
Fillmore County SheriffLaw Dispatch208215155D

Nearest trunked radio sites

Distances are measured from the center of Arendahl.

Troy - Utica · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 3 · Site 15 (hex F) · NAC 405 · about 7 mi away
Control 855.4625
Voice 853.075, 856.4875, 856.7625, 858.2625, 859.9875
Amherst · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 3 · Site 2 (hex 2) · about 10 mi away
Control 851.4875, 858.9375
Voice 851.9375, 852.9375, 857.2375
Money Creek · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 3 · Site 10 (hex A) · NAC 407 · about 13 mi away
Control 855.7375
Voice 851.4125, 851.9125, 852.9125, 853.4125
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency do the police use in Arendahl?

We do not have a dispatch channel listed specifically for Arendahl. County-level dispatch channels in the same county: Fillmore County Sheriff 154.8750 MHz (110.9 PL).