Skip to content

Grand Prairie Police Frequencies

We do not have frequencies listed specifically for Grand Prairie in Nobles County, Minnesota yet. Countywide channels for Nobles County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Ellsworth (Allied Radio Matrix for Emergency Response (ARMER)), about 5 miles away.

About Grand Prairie Police Frequencies

  • 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry law-enforcement traffic here: Allied Radio Matrix for Emergency Response (ARMER): 3 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Grand Prairie, start with the Ellsworth site of Allied Radio Matrix for Emergency Response (ARMER), about 5 miles away. Its control channels: 858.2375, 859.7125 MHz.

Nobles County channels that also cover Grand Prairie

Jails & Corrections

Jails & Corrections frequencies for Nobles County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Nobles County SheriffNobles County Jail156.9900
In 159.0000
136.5 PLFMNKAG664

Allied Radio Matrix for Emergency Response (ARMER)

Allied Radio Matrix for Emergency Response (ARMER) talkgroups
AgencyDescriptionTalkgroupHexMode
Nobles County SheriffCounty Law Dispatch31101797dD
Nobles County SheriffCounty Law Car to Car31102797eD
Nobles County SheriffCounty Jail311077983D

Nearest trunked radio sites

Distances are measured from the center of Grand Prairie.

Ellsworth · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 2 · Site 39 (hex 27) · NAC 401 · about 5 mi away
Control 858.2375, 859.7125
Voice 853.4625, 858.7125, 858.9875
Rushmore · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 2 · Site 27 (hex 1B) · about 12 mi away
Control 852.4, 856.2125
Voice 851.475, 857.9375, 858.4625
Worthington · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 2 · Site 28 (hex 1C) · about 15 mi away
Control 852.9375, 859.9875
Voice 855.2375, 858.7625, 859.7625
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.