Skip to content

Grove Lake Police Frequencies

We do not have frequencies listed specifically for Grove Lake in Pope County, Minnesota yet. Countywide channels for Pope County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Terrace (Allied Radio Matrix for Emergency Response (ARMER)), about 9 miles away.

About Grove Lake Police Frequencies

  • Trunked radio systems that carry law-enforcement traffic here: Allied Radio Matrix for Emergency Response (ARMER): 2 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Grove Lake, start with the Terrace site of Allied Radio Matrix for Emergency Response (ARMER), about 9 miles away. Its control channels: 851.9625, 852.9625 MHz.
  • 1 listed entry is marked encrypted. No scanner can decode encrypted audio.

Pope County channels that also cover Grove Lake

Allied Radio Matrix for Emergency Response (ARMER)

Allied Radio Matrix for Emergency Response (ARMER) talkgroups
AgencyDescriptionTalkgroupHexMode
Pope County SheriffCounty Law Dispatch2610065f4D
1 encrypted talkgroup (cannot be monitored)
Allied Radio Matrix for Emergency Response (ARMER) encrypted talkgroups
AgencyDescriptionTalkgroupHexMode
Pope County SheriffPope County Sheriff – Tactical Channel261156603D Encrypted

Nearest trunked radio sites

Distances are measured from the center of Grove Lake.

Terrace · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 4 · Site 16 (hex 10) · NAC 407 · about 9 mi away
Control 851.9625, 852.9625
Voice 851.4625, 852.4625, 853.4625, 858.2125
Glenwood · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 4 · Site 6 (hex 6) · NAC 409 · about 10 mi away
Control 851.4125, 852.9125
Voice 851.9125, 852.4125, 853.4125, 859.2125
Sauk Centre · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 4 · Site 36 (hex 24) · NAC 40F · about 13 mi away
Control 854.3125, 854.5125
Voice 854.7125, 857.6875, 858.0875, 858.5875
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.