Skip to content

New Prairie Police Frequencies

We do not have frequencies listed specifically for New Prairie in Pope County, Minnesota yet. Countywide channels for Pope County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Starbuck (Allied Radio Matrix for Emergency Response (ARMER)), about 8 miles away.

About New Prairie Police Frequencies

  • Trunked radio systems that carry law-enforcement traffic here: Allied Radio Matrix for Emergency Response (ARMER): 2 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For New Prairie, start with the Starbuck site of Allied Radio Matrix for Emergency Response (ARMER), about 8 miles away. Its control channels: 851.3875, 855.7375 MHz.
  • 1 listed entry is marked encrypted. No scanner can decode encrypted audio.

Pope County channels that also cover New Prairie

Allied Radio Matrix for Emergency Response (ARMER)

Allied Radio Matrix for Emergency Response (ARMER) talkgroups
AgencyDescriptionTalkgroupHexMode
Pope County SheriffCounty Law Dispatch2610065f4D
1 encrypted talkgroup (cannot be monitored)
Allied Radio Matrix for Emergency Response (ARMER) encrypted talkgroups
AgencyDescriptionTalkgroupHexMode
Pope County SheriffPope County Sheriff – Tactical Channel261156603D Encrypted

Nearest trunked radio sites

Distances are measured from the center of New Prairie.

Starbuck · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 4 · Site 82 (hex 52) · about 8 mi away
Control 851.3875, 855.7375
Voice 851.8, 852.1, 853.125
Morris · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 4 · Site 14 (hex E) · NAC 40E · about 12 mi away
Control 851.4375, 855.2375
Voice 851.9375, 852.4375, 852.9375, 853.4375
Hoffman · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 4 · Site 8 (hex 8) · NAC 40D · about 14 mi away
Control 857.9375, 858.9375
Voice 853.85, 856.4625, 859.9375, 860.9375
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.