About Shieldsville Police Frequencies
- Trunked radio systems that carry law-enforcement traffic here: Allied Radio Matrix for Emergency Response (ARMER): 8 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Shieldsville, start with the Waterville site of Allied Radio Matrix for Emergency Response (ARMER), about 7 miles away. Its control channels: 852.35 MHz.
- 8 listed entries are marked encrypted. No scanner can decode encrypted audio.
Rice County channels that also cover Shieldsville
Allied Radio Matrix for Emergency Response (ARMER)
8 encrypted talkgroups (cannot be monitored)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Rice County Sheriff | Law Enforcement 1 Main | 22601 | 5849 | D Encrypted |
| Rice County Sheriff | Law Enforcement 2 Car to Car | 22602 | 584a | D Encrypted |
| Rice County Sheriff | Rice Investigations | 22603 | 584b | D Encrypted |
| Rice County Sheriff | Rice Sheriff Operations | 22604 | 584c | D Encrypted |
| Rice County Sheriff | Rice Drug Task Force | 22611 | 5853 | D Encrypted |
| Rice County Sheriff | Rice Drug Task Force | 22612 | 5854 | D Encrypted |
| Rice County Sheriff | Rice Law | 22619 | 585b | D Encrypted |
| Rice County Sheriff | Rice Sheriff Court – Jail | 22617 | 5859 | D Encrypted |
Nearest trunked radio sites
Distances are measured from the center of Shieldsville.
Waterville · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 3 · Site 20 (hex 14) · about 7 mi away
Control 852.35
Voice 851.45, 851.9, 852.2, 853.175, 853.475, 853.875
Rice Co. - Simulcast · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 3 · Site 44 (hex 2C) · about 8 mi away
Control 851.8, 851.975
Voice 851.1, 852.15, 852.3, 852.4, 852.55, 852.65, 852.875, 853.675
LeCenter · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 3 · Site 32 (hex 20) · about 10 mi away
Voice 851.825, 852.175, 852.375, 852.85, 853.5
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.