About Wheatland Police Frequencies
- Trunked radio systems that carry law-enforcement traffic here: Allied Radio Matrix for Emergency Response (ARMER): 8 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Wheatland, start with the Lonsdale site of Allied Radio Matrix for Emergency Response (ARMER), about 4 miles away. Its control channels: 851.375, 851.975, 852.3 MHz.
- 8 listed entries are marked encrypted. No scanner can decode encrypted audio.
Rice County channels that also cover Wheatland
Allied Radio Matrix for Emergency Response (ARMER)
8 encrypted talkgroups (cannot be monitored)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Rice County Sheriff | Law Enforcement 1 Main | 22601 | 5849 | D Encrypted |
| Rice County Sheriff | Law Enforcement 2 Car to Car | 22602 | 584a | D Encrypted |
| Rice County Sheriff | Rice Investigations | 22603 | 584b | D Encrypted |
| Rice County Sheriff | Rice Sheriff Operations | 22604 | 584c | D Encrypted |
| Rice County Sheriff | Rice Drug Task Force | 22611 | 5853 | D Encrypted |
| Rice County Sheriff | Rice Drug Task Force | 22612 | 5854 | D Encrypted |
| Rice County Sheriff | Rice Law | 22619 | 585b | D Encrypted |
| Rice County Sheriff | Rice Sheriff Court – Jail | 22617 | 5859 | D Encrypted |
Nearest trunked radio sites
Distances are measured from the center of Wheatland.
Lonsdale · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 3 · Site 9 (hex 9) · about 4 mi away
Control 851.375, 851.975, 852.3
Voice 852.55, 852.875, 853.675
Rice Co. - Simulcast · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 3 · Site 44 (hex 2C) · about 13 mi away
Control 851.8, 851.975
Voice 851.1, 852.15, 852.3, 852.4, 852.55, 852.65, 852.875, 853.675
Carver - Scott Co. Simulcast · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 1 · Site 4 (hex 4) · NAC 404 · about 14 mi away
Control 851.8875, 852.075, 852.4375, 853.7875
Voice 851.125, 851.375, 851.4375, 851.7, 852.7, 852.8, 852.9375, 853.225, 853.375, 853.4625, 854.5875, 855.9875
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.