Skip to content

Darnen Police Frequencies

We do not have frequencies listed specifically for Darnen in Stevens County, Minnesota yet. Countywide channels for Stevens County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Morris (Allied Radio Matrix for Emergency Response (ARMER)), about 4 miles away.

About Darnen Police Frequencies

  • Trunked radio systems that carry law-enforcement traffic here: Allied Radio Matrix for Emergency Response (ARMER): 2 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Darnen, start with the Morris site of Allied Radio Matrix for Emergency Response (ARMER), about 4 miles away. Its control channels: 851.4375, 855.2375 MHz.
  • 1 listed entry is marked encrypted. No scanner can decode encrypted audio.

Stevens County channels that also cover Darnen

Allied Radio Matrix for Emergency Response (ARMER)

Allied Radio Matrix for Emergency Response (ARMER) talkgroups
AgencyDescriptionTalkgroupHexMode
Stevens County SheriffLaw Dispatch2634366e7D
1 encrypted talkgroup (cannot be monitored)
Allied Radio Matrix for Emergency Response (ARMER) encrypted talkgroups
AgencyDescriptionTalkgroupHexMode
Stevens County SheriffLaw Tactical2634466e8D Encrypted

Nearest trunked radio sites

Distances are measured from the center of Darnen.

Morris · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 4 · Site 14 (hex E) · NAC 40E · about 4 mi away
Control 851.4375, 855.2375
Voice 851.9375, 852.4375, 852.9375, 853.4375
Holloway · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 4 · Site 10 (hex A) · NAC 404 · about 14 mi away
Control 856.9875, 857.9875
Voice 855.7125, 859.9875, 860.9875
Johnson · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 4 · Site 26 (hex 1A) · NAC 406 · about 18 mi away
Control 854.9625, 856.7375
Voice 857.7375, 858.7375, 859.7375, 860.7375
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.