Skip to content

Traverse County Police Frequencies

Traverse County in Minnesota has 0 countywide conventional frequencies and 3 countywide talkgroups in our database. Use the list of 18 cities and communities below for local police departments.

About Traverse County Police Frequencies

Quick answer: Trunked: Allied Radio Matrix for Emergency Response (ARMER), for example Traverse County Sheriff talkgroup 26708 (hex 6854).

  • Trunked radio systems that carry law-enforcement traffic here: Allied Radio Matrix for Emergency Response (ARMER): 3 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Traverse County, start with the Browns Valley site of Allied Radio Matrix for Emergency Response (ARMER). Its control channels: 854.9875, 856.2375 MHz.
  • 2 listed entries are marked encrypted. No scanner can decode encrypted audio.

Data updated .

Traverse County trunked talkgroups

Allied Radio Matrix for Emergency Response (ARMER)

Allied Radio Matrix for Emergency Response (ARMER) talkgroups
AgencyDescriptionTalkgroupHexMode
Traverse County SheriffLaw Dispatch267086854D
2 encrypted talkgroups (cannot be monitored)
Allied Radio Matrix for Emergency Response (ARMER) encrypted talkgroups
AgencyDescriptionTalkgroupHexMode
Traverse County SheriffLaw Tactical267096855D Encrypted
Traverse County SheriffLaw Tactical267106856D Encrypted

Radio system sites in Traverse County

Program the control channel first; your scanner finds the voice channels from it.

Browns Valley · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 4 · Site 2 (hex 2) · NAC 409
Control 854.9875, 856.2375
Voice 857.2375, 858.2375, 859.2375, 860.2375
Wheaton · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 4 · Site 18 (hex 12) · NAC 40B
Control 859.7625, 860.7625
Voice 855.9625, 856.7625, 857.7625, 858.7625
Dumont · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 4 · Site 78 (hex 4E) · NAC 403
Control 851.45, 851.875
Voice 853.45, 858.9625, 859.9625
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Traverse County

Common questions

Do the police use a trunked radio system in Traverse County?

Yes. Law-enforcement talkgroups are listed for Allied Radio Matrix for Emergency Response (ARMER): 3 talkgroups. A trunking scanner is required.

What scanner do I need to listen to police in Traverse County?

A trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Traverse County?

For Traverse County, start with the Browns Valley site of Allied Radio Matrix for Emergency Response (ARMER). Its control channels are 854.9875, 856.2375 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Traverse County police talkgroups encrypted?

2 of the 3 talkgroups listed for Traverse County are marked fully or partly encrypted; a scanner cannot decode encrypted audio.