Skip to content

Huntersville Police Frequencies

We do not have frequencies listed specifically for Huntersville in Wadena County, Minnesota yet. Countywide channels for Wadena County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Backus (Allied Radio Matrix for Emergency Response (ARMER)), about 10 miles away.

About Huntersville Police Frequencies

  • 1 conventional channel uses a digital mode (P25), which needs a scanner that decodes that mode.
  • Trunked radio systems that carry law-enforcement traffic here: Allied Radio Matrix for Emergency Response (ARMER): 5 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Huntersville, start with the Backus site of Allied Radio Matrix for Emergency Response (ARMER), about 10 miles away. Its control channels: 851.9125, 855.2125 MHz.

Wadena County channels that also cover Huntersville

Jails & Corrections

AgencyDescriptionFrequency (MHz)ToneModeFCC
Wadena County JailCounty Jail853.9625NAC 293P25—

Allied Radio Matrix for Emergency Response (ARMER)

AgencyDescriptionTalkgroupHexMode
Wadena County SheriffCounty Law Dispatch281016dc5D
Wadena County SheriffWD 1281026dc6D
Wadena County SheriffWadena County Joint Task Force281156dd3D
Wadena County SheriffWadena County Joint Task Force281166dd4D
Wadena County SheriffCounty281176dd5D

Nearest trunked radio sites

Distances are measured from the center of Huntersville.

Backus · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 5 · Site 1 (hex 1) · NAC 40E · about 10 mi away
Control 851.9125, 855.2125
Voice 851.5625, 852.4625, 853.475, 856.4625
Sebeka · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 4 · Site 98 (hex 62) · NAC 408 · about 11 mi away
Control 852.875, 858.4625
Voice 851.45, 852.4, 858.7625
Nevis · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 6 · Site 69 (hex 45) · NAC 405 · about 12 mi away
Control 851.9875, 856.9375
Voice 851.4875, 858.9375, 859.9375
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.