Skip to content

Freedom Police Frequencies

We do not have frequencies listed specifically for Freedom in Waseca County, Minnesota yet. Countywide channels for Waseca County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Waldorf (Allied Radio Matrix for Emergency Response (ARMER)), about 4 miles away.

About Freedom Police Frequencies

  • Trunked radio systems that carry law-enforcement traffic here: Allied Radio Matrix for Emergency Response (ARMER): 1 talkgroup; Federal Correctional Institution Waseca: 5 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Freedom, start with the Waldorf site of Allied Radio Matrix for Emergency Response (ARMER), about 4 miles away. Its control channels: 852.9125 MHz.
  • 1 listed entry is marked encrypted. No scanner can decode encrypted audio.

Waseca County channels that also cover Freedom

Allied Radio Matrix for Emergency Response (ARMER)

1 encrypted talkgroup (cannot be monitored)
AgencyDescriptionTalkgroupHexMode
Waseca County SheriffLaw 1 Dispatch346118733D

Federal Correctional Institution Waseca

AgencyDescriptionTalkgroupHexMode
FCIWOperations33D
FCIWOperations55D
FCIWOperations77D
FCIWOperations12cD
FCIWOperations2014D

Nearest trunked radio sites

Distances are measured from the center of Freedom.

Waldorf · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 3 · Site 82 (hex 52) · about 4 mi away
Control 852.9125
Voice 851.3125, 851.475, 852.4125, 853.8875, 856.4875
Janesville · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 3 · Site 31 (hex 1F) · about 7 mi away
Control 851.75
Voice 851.4125, 852.3875, 852.8875, 853.4125, 853.9125, 857.4375
Waseca · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 3 · Site 11 (hex B) · about 12 mi away
Control 851.9375, 853.3875, 854.4625
Voice 851.575, 852.175, 852.325, 852.95, 854.0875
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.