About South Branch Police Frequencies
- Trunked radio systems that carry law-enforcement traffic here: Allied Radio Matrix for Emergency Response (ARMER): 1 talkgroup. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For South Branch, start with the Truman site of Allied Radio Matrix for Emergency Response (ARMER), about 7 miles away. Its control channels: 851.725, 852.875 MHz.
Watonwan County channels that also cover South Branch
Allied Radio Matrix for Emergency Response (ARMER)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Watonwan County Sheriff | Watonwan Law Main | 34224 | 85b0 | D |
Nearest trunked radio sites
Distances are measured from the center of South Branch.
Truman · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 3 · Site 77 (hex 4D) · about 7 mi away
Control 851.725, 852.875
Voice 851.425, 853.425, 857.7125, 858.7125
La Salle · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 3 · Site 30 (hex 1E) · about 11 mi away
Control 858.9375, 859.9375
Voice 851.2875, 851.9125, 852.9625, 854.9875
Madelia · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 3 · Site 8 (hex 8) · about 13 mi away
Control 854.6125
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.