Hanover also extends into Hennepin County.
About Hanover Police Frequencies
- Trunked radio systems that carry law-enforcement traffic here: Allied Radio Matrix for Emergency Response (ARMER): 11 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Hanover, start with the Hennepin Co. West Simulcast site of Allied Radio Matrix for Emergency Response (ARMER), about 9 miles away. Its control channels: 852.2625, 852.6125, 853.6375 MHz.
- 8 listed entries are marked encrypted. No scanner can decode encrypted audio.
Wright County channels that also cover Hanover
Allied Radio Matrix for Emergency Response (ARMER)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Wright County Sheriff | Backup LAW MAIN | 25359 | 630f | D |
| Wright County Sheriff | Backup LAW | 25360 | 6310 | D |
| Wright County Sheriff | Backup LAW | 25361 | 6311 | D |
8 encrypted talkgroups (cannot be monitored)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Wright County Sheriff | LAW MAIN 1E | 25362 | 6312 | D Encrypted |
| Wright County Sheriff | LAW MAIN 2E | 25363 | 6313 | D Encrypted |
| Wright County Sheriff | County Law | 25364 | 6314 | D Encrypted |
| Wright County Sheriff | County ERT | 25369 | 6319 | D Encrypted |
| Wright County Sheriff | County SIU | 25370 | 631a | D Encrypted |
| Wright County Sheriff | County SIU | 25371 | 631b | D Encrypted |
| Wright County Sheriff | County Command | 25372 | 631c | D Encrypted |
| Wright County Sheriff | Wright Co Jail | 25387 | 632b | D Encrypted |
Nearest trunked radio sites
Distances are measured from the center of Hanover.
Hennepin Co. West Simulcast · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 2 · Site 2 (hex 2) · NAC 40E · about 9 mi away
Control 852.2625, 852.6125, 853.6375, 853.8875
Voice 851.4125, 851.9125, 851.9625, 852.4125, 852.8625, 852.9125, 853.4125, 854.4125, 856.7125, 857.7125, 858.2125, 859.7125
Sherburne - Wright Co. Simulcast · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 4 · Site 40 (hex 28) · NAC 40F · about 14 mi away
Control 851.475, 851.85
Voice 851.175, 851.275, 851.575, 852.325, 852.775, 852.9, 853.175, 853.575, 858.3625
Hennepin Co. East Simulcast · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 2 · Site 1 (hex 1) · NAC 40F · about 19 mi away
Control 852.1625, 852.2875, 852.3625, 853.8375
Voice 851.0875, 851.2125, 851.5375, 851.6125, 851.7875, 852.1125, 852.475, 852.5375, 852.7375, 852.8375, 852.9625, 853.2625, 853.4375, 853.5375, 853.6125, 854.4125, 856.0125, 857.7125, 857.9625, 858.7125, 858.9625, 859.7125, 859.9625, 860.9625
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.