About Tippah County Police Frequencies
- 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry law-enforcement traffic here: Mississippi Wireless Information Network (MSWIN): 1 talkgroup. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Tippah County, start with the ETV Booneville site of Mississippi Wireless Information Network (MSWIN). Its control channels: 773.29375, 773.54375, 773.79375 MHz.
Tippah County conventional frequencies
Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Tippah County Sheriff | Tippah Sheriff Dispatch | 155.3025 In 158.9775 | 261 DPL | FMN | WPLP768 |
Tippah County trunked talkgroups
Mississippi Wireless Information Network (MSWIN)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Tippah County Sheriff | Tippah County Sheriff – Dispatch | 57573 | e0e5 | T |
Radio system sites in Tippah County
Program the control channel first; your scanner finds the voice channels from it.
ETV Booneville · Mississippi Wireless Information Network (MSWIN)
RFSS 3 · Site 37 (hex 25) · NAC 2A3
Control 773.29375, 773.54375, 773.79375
Voice 771.23125, 772.08125, 773.04375, 774.06875
Ripley · Mississippi Wireless Information Network (MSWIN)
RFSS 3 · Site 53 (hex 35) · NAC 2A0
Control 770.58125
Voice 769.31875, 772.16875, 772.45625, 772.85625, 773.88125
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Cities & communities in Tippah County
Common questions
What frequency do the police use in Tippah County?
Dispatch channels listed for Tippah County: Tippah County Sheriff 155.3025 MHz (261 DPL).
Are Tippah County police talkgroups encrypted?
None of the 1 talkgroups listed for Tippah County are marked encrypted.