Skip to content

Franklin Police Frequencies

We do not have frequencies listed specifically for Franklin in Howard County, Missouri yet. Countywide channels for Howard County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Boonville (Missouri Statewide Wireless Interoperable Network (MOSWIN)), about 6 miles away.

About Franklin Police Frequencies

  • 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry law-enforcement traffic here: Missouri Statewide Wireless Interoperable Network (MOSWIN): 2 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Franklin, start with the Boonville site of Missouri Statewide Wireless Interoperable Network (MOSWIN), about 6 miles away. Its control channels: 154.695, 155.6025 MHz.

Howard County channels that also cover Franklin

Dispatch

AgencyDescriptionFrequency (MHz)ToneModeFCC
Central Dispatch BackupCentral Dispatch – Dispatch151.2500
In 158.9700
74.4 PLFMNKNFL501

Missouri Statewide Wireless Interoperable Network (MOSWIN)

AgencyDescriptionTalkgroupHexMode
Howard County SheriffHoward County Sheriff – Dispatch275036b6fD
Howard County SheriffOperations275066b72D

Nearest trunked radio sites

Distances are measured from the center of Franklin.

Boonville · Missouri Statewide Wireless Interoperable Network (MOSWIN)
RFSS 1 · Site 15 (hex F) · NAC 1CF · about 6 mi away
Control 154.695, 155.6025
Voice 154.8225, 154.9425, 155.46
Fayette 700 · Missouri Statewide Wireless Interoperable Network (MOSWIN)
RFSS 1 · Site 93 (hex 5D) · NAC 1CB · about 10 mi away
Control 769.19375, 769.44375, 769.69375, 769.94375
Voice 770.19375, 770.44375
Pipertown · Missouri Statewide Wireless Interoperable Network (MOSWIN)
RFSS 5 · Site 8 (hex 8) · NAC 1C7 · about 22 mi away
Control 154.7325, 169.65
Voice 154.8825, 155.505, 172.6125
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.