Skip to content

Vaughn Police Frequencies

We do not have frequencies listed specifically for Vaughn in Cascade County, Montana yet. Countywide channels for Cascade County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Great Falls (Montana Public Safety Communications System), about 11 miles away.

About Vaughn Police Frequencies

  • 7 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.

Cascade County channels that also cover Vaughn

Dispatch

Dispatch frequencies for Cascade County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Cascade County SheriffCentral Dispatch154.7100
In 155.6400
67.0 PLFMNKNGK744
Cascade County SheriffNorth Dispatch154.7700
In 155.5800
141.3 PLFMNWNPQ744
Cascade County SheriffSheriff 5154.8000
In 155.6700
151.4 PLFMNKNFW803

Tactical

Tactical frequencies for Cascade County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Cascade County SheriffCascade County Sheriff – Tactical Channel (040)154.0400
In 156.0150
67.0 PLFMNKNGK744
Cascade County SheriffCascade County Sheriff – Tactical Channel155.3700FMNKNGK744

Jails & Corrections

Jails & Corrections frequencies for Cascade County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Cascade County SheriffSheriff Jail Security155.8800107.2 PLFMNKLI972
Cascade County SheriffSheriff Jail Security453.5250
In 458.5250
141.3 PLFMNKDJ995

Nearest trunked radio sites

Distances are measured from the center of Vaughn.

Great Falls · Montana Public Safety Communications System
RFSS 1 · Site 37 (hex 25) · NAC 161 · about 11 mi away
Control 153.86, 154.205
Voice 154.34, 155.01, 161.9625
Gore Hill 800 · Montana Public Safety Communications System
RFSS 1 · Site 40 (hex 28) · NAC 166 · about 11 mi away
Control 851.175, 851.425, 851.8
Voice 853.5
Smelter Hill · Montana Public Safety Communications System
RFSS 1 · Site 36 (hex 24) · NAC 163 · about 14 mi away
Control 154.89, 164.725
Voice 151.16, 151.355, 153.845
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency do the police use in Vaughn?

We do not have a dispatch channel listed specifically for Vaughn. County-level dispatch channels in the same county: Cascade County Sheriff 154.7100 MHz (67.0 PL); Cascade County Sheriff 154.7700 MHz (141.3 PL); Cascade County Sheriff 154.8000 MHz (151.4 PL).