Skip to content

Glendive Police Frequencies

Glendive in Dawson County, Montana has 2 conventional frequencies and 0 trunked talkgroups listed for local agencies. The closest trunked radio site we have is Makoshika (Montana Public Safety Communications System), about 4 miles away.

About Glendive Police Frequencies

  • 5 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • 1 conventional channel uses a digital mode (P25), which needs a scanner that decodes that mode.

Glendive conventional frequencies

Dispatch

Dispatch frequencies for Glendive
AgencyDescriptionFrequency (MHz)ToneModeFCC
Glendive PoliceGlendive Police – Dispatch158.9700FMNWPTA339

Talk-around & Car-to-Car

Talk-around & Car-to-Car frequencies for Glendive
AgencyDescriptionFrequency (MHz)ToneModeFCC
Glendive PoliceDPW/Fire/Police Common155.7150FMNWPYV607

Dawson County channels that also cover Glendive

Dispatch

Dispatch frequencies for Dawson County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Dawson County SheriffSheriff 1 Dispatch159.1500
In 155.0100
P25WNNW485

Tactical

Tactical frequencies for Dawson County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Dawson County SheriffDawson County Sheriff – Tactical Channel154.8300FMNWPTR652

Talk-around & Car-to-Car

Talk-around & Car-to-Car frequencies for Dawson County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Dawson County SheriffSheriff 2154.9800
In 155.8800
FMNWRB467
Dawson County SheriffSheriff Jail453.7000
In 458.7000
FMNWPMP584

Nearest trunked radio sites

Distances are measured from the center of Glendive.

Makoshika · Montana Public Safety Communications System
RFSS 2 · Site 5 (hex 5) · about 4 mi away
Control 161.9125, 161.9375
Fallon · Montana Public Safety Communications System
RFSS 2 · Site 2 (hex 2) · about 25 mi away
Control 161.9625, 161.9875
Site 2-008 TBD · Montana Public Safety Communications System
RFSS 2 · Site 8 (hex 8) · about 36 mi away
Control 161.8125
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency do the police use in Glendive?

Dispatch channels listed for Glendive: Glendive Police 158.9700 MHz.