Skip to content

Gildford Police Frequencies

We do not have frequencies listed specifically for Gildford in Hill County, Montana yet. Countywide channels for Hill County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Hill County Sheriff Office (Montana Public Safety Communications System), about 29 miles away.

About Gildford Police Frequencies

  • 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry law-enforcement traffic here: Montana Public Safety Communications System: 1 talkgroup. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Gildford, start with the Hill County Sheriff Office site of Montana Public Safety Communications System, about 29 miles away. Its control channels: 151.295, 154.235 MHz.

Hill County channels that also cover Gildford

Dispatch

Dispatch frequencies for Hill County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Hill County SheriffHill County Sheriff – Dispatch154.7100
In 156.2100
114.8 PLFMNKNEA298

Tactical

Tactical frequencies for Hill County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Hill County SheriffHill County Sheriff – Tactical Channel155.6250FMNKNEA298

Montana Public Safety Communications System

Montana Public Safety Communications System talkgroups
AgencyDescriptionTalkgroupHexMode
Hill County SheriffHill County Sheriff – Dispatch6155180bD

Nearest trunked radio sites

Distances are measured from the center of Gildford.

Hill County Sheriff Office · Montana Public Safety Communications System
RFSS 1 · Site 19 (hex 13) · about 29 mi away
Control 151.295, 154.235
Voice 153.995
Boyce Ranch · Montana Public Safety Communications System
RFSS 1 · Site 47 (hex 2F) · about 30 mi away
Control 151.34, 153.92
Voice 154.415
Mount Royal · Montana Public Safety Communications System
RFSS 1 · Site 18 (hex 12) · NAC 162 · about 49 mi away
Control 151.43, 161.9375
Voice 151.205
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency do the police use in Gildford?

We do not have a dispatch channel listed specifically for Gildford. County-level dispatch channels in the same county: Hill County Sheriff 154.7100 MHz (114.8 PL).