About Gardiner Police Frequencies
- 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
Park County channels that also cover Gardiner
Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Park County Sheriff | Park County Sheriff – Dispatch | 154.8600 In 155.3700 | FMN | WPHK627 |
Nearest trunked radio sites
Distances are measured from the center of Gardiner.
Horse Butte (West Yellowstone) · Gallatin County / Bozeman
RFSS 1 · Site 3 (hex 3) · NAC 820 · about 31 mi away
Control 856.0125, 857.2625, 857.7625, 858.2625
Big Sky Simulcast · Gallatin County / Bozeman
RFSS 1 · Site 2 (hex 2) · NAC 820 · about 35 mi away
Control 856.2125, 856.7125, 857.0125, 857.4375
Beacon Hill · Montana Public Safety Communications System
RFSS 1 · Site 30 (hex 1E) · NAC 160 · about 41 mi away
Control 155.04, 155.415
Voice 154.965, 155.94
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency do the police use in Gardiner?
We do not have a dispatch channel listed specifically for Gardiner. County-level dispatch channels in the same county: Park County Sheriff 154.8600 MHz.