Skip to content

Froid Police Frequencies

We do not have frequencies listed specifically for Froid in Roosevelt County, Montana yet. Countywide channels for Roosevelt County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Culbertson (Montana Public Safety Communications System), about 10 miles away.

About Froid Police Frequencies

  • 4 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • 2 conventional channels use a digital mode (P25), which needs a scanner that decodes that mode.

Roosevelt County channels that also cover Froid

Dispatch

Dispatch frequencies for Roosevelt County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Roosevelt County & CommunitiesPoplar Dispatch155.8050152 DPLFMNWPOZ510
Roosevelt County & CommunitiesRCSO Cnty Wide156.0150152 DPLFMNWNFC411
Roosevelt County & CommunitiesBrockton/Frazier Dispatch173.7600
In 166.7950
114.8 PLFMNNONEFND
Roosevelt County & CommunitiesBrockton/Frazier Astro Digital173.7600
In 166.7950
P25NONEFND

Tactical

Tactical frequencies for Roosevelt County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Roosevelt County & CommunitiesRCSO Tactical/Info Channel159.1500
In 154.7250
FMNWBE489

Talk-around & Car-to-Car

Talk-around & Car-to-Car frequencies for Roosevelt County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Roosevelt County & CommunitiesRCSO Astro Digital155.1450P25WPOZ510

Nearest trunked radio sites

Distances are measured from the center of Froid.

Culbertson · Montana Public Safety Communications System
RFSS 2 · Site 9 (hex 9) · NAC 160 · about 10 mi away
Control 151.145, 161.9375
Voice 151.385, 151.445
Plentywood · Montana Public Safety Communications System
RFSS 2 · Site 1 (hex 1) · NAC 161 · about 25 mi away
Control 151.085, 158.85
Voice 151.28, 151.355
Antelope Butte · Montana Public Safety Communications System
RFSS 2 · Site 12 (hex C) · NAC 16C · about 27 mi away
Control 154.235, 154.37
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.