About Antelope Police Frequencies
- 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
Franklin County channels that also cover Antelope
Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Franklin County Sheriff | Franklin County Sheriff – Dispatch | 155.3700 | 664 DPL | FMN | KAG796 |
Nearest trunked radio sites
Distances are measured from the center of Antelope.
Franklin · Nebraska State Radio System
RFSS 1 · Site 71 (hex 47) · about 12 mi away
Control 154.71, 154.98
Voice 154.16, 154.355
Holstein · Adams County
Site 2 (hex 2) · about 17 mi away
Control 453.5125
Voice 453.225, 453.7625
Kenesaw · Adams County
Site 3 (hex 3) · about 25 mi away
Control 460.3125
Voice 460.0625, 460.525
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency do the police use in Antelope?
We do not have a dispatch channel listed specifically for Antelope. County-level dispatch channels in the same county: Franklin County Sheriff 155.3700 MHz (664 DPL).