Skip to content

Lansing Police Frequencies

We do not have frequencies listed specifically for Lansing in Ashe County, North Carolina yet. Countywide channels for Ashe County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Phoenix Mtn (North Carolina VIPER), about 3 miles away.

About Lansing Police Frequencies

  • 5 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry law-enforcement traffic here: North Carolina VIPER: 5 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Lansing, start with the Phoenix Mtn site of North Carolina VIPER, about 3 miles away. Its control channels: 852.4375, 853.8875 MHz.

Ashe County channels that also cover Lansing

Dispatch

Dispatch frequencies for Ashe County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Ashe County SheriffAshe Sheriff154.8450
In 159.9900
123.0 PLFMKNGY525
Ashe County SheriffAshe Sheriff Mutual Aid154.8750123.0 PLFMKNGY525
Ashe County SheriffAshe Sheriff Dispatch157.5000
In 155.8500
123.0 PLFMKNGY525

Tactical

Tactical frequencies for Ashe County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Ashe County SheriffWest Jefferson Police Department Private151.8350043 DPLFMN—
Ashe County SheriffAshe Sheriff Tactical153.3150151.4 PLFMN—

North Carolina VIPER

North Carolina VIPER talkgroups
AgencyDescriptionTalkgroupHexMode
Ashe County SheriffAshe County Sheriff460611feD
Ashe County SheriffAshe County Sheriff NARC46081200D
Ashe County SheriffAshe County Sheriff Patrol46091201D
Ashe County SheriffAshe County Sheriff Administration460711ffD
Ashe County SheriffAshe County Sheriff INV46141206D

Nearest trunked radio sites

Distances are measured from the center of Lansing.

Phoenix Mtn · North Carolina VIPER
RFSS 2 · Site 69 (hex 45) · NAC 1F4 · about 3 mi away
Control 852.4375, 853.8875
Voice 851.1125, 851.7875, 852.125
Rich Hill · North Carolina VIPER
RFSS 2 · Site 74 (hex 4A) · NAC 1F0 · about 6 mi away
Control 773.41875, 774.20625
Voice 771.30625, 771.88125, 772.20625
Jefferson Mtn · North Carolina VIPER
RFSS 2 · Site 51 (hex 33) · NAC 1F0 · about 7 mi away
Control 853.2125, 859.7125
Voice 851.675, 851.9625, 852.55
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency do the police use in Lansing?

We do not have a dispatch channel listed specifically for Lansing. County-level dispatch channels in the same county: Ashe County Sheriff 154.8450 MHz (123.0 PL); Ashe County Sheriff 154.8750 MHz (123.0 PL); Ashe County Sheriff 157.5000 MHz (123.0 PL).