Skip to content

Banner Elk Police Frequencies

Banner Elk in Avery County, North Carolina has 1 conventional frequency and 0 trunked talkgroups listed for local agencies. The closest trunked radio site we have is Beech Mtn (North Carolina VIPER), about 2 miles away.

About Banner Elk Police Frequencies

  • 5 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry law-enforcement traffic here: North Carolina VIPER: 2 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Banner Elk, start with the Beech Mtn site of North Carolina VIPER, about 2 miles away. Its control channels: 852.9125, 853.875 MHz.
  • 3 entries are marked expired, so they may no longer be in use.

Banner Elk conventional frequencies

Tactical

Tactical frequencies for Banner Elk
AgencyDescriptionFrequency (MHz)ToneModeFCC
Banner Elk Police Expired: Expired 5/02Banner Elk Police – Tactical Channel155.0550FMKNCK910

Avery County channels that also cover Banner Elk

Dispatch

Dispatch frequencies for Avery County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Avery County Sheriff Expired: Expired 2/03Avery County Sheriff – Dispatch155.6250
In 155.0700
167.9 PLFMNKNCU503

Tactical

Tactical frequencies for Avery County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Avery County Sheriff Expired: Expired 2/03Avery County Sheriff – Tactical Channel154.8750167.9 PLFMNKNCU503
Avery County SheriffOperations155.0700FMN—
Avery County SheriffAvery County Sheriff – Tactical Channel160.9000151.4 PLFMN—

North Carolina VIPER

North Carolina VIPER talkgroups
AgencyDescriptionTalkgroupHexMode
Avery County SheriffSheriff's Office47041260D
Avery County SheriffSouth Law4714126aD

Nearest trunked radio sites

Distances are measured from the center of Banner Elk.

Beech Mtn · North Carolina VIPER
RFSS 2 · Site 7 (hex 7) · NAC 1F0 · about 2 mi away
Control 852.9125, 853.875
Voice 851.2625, 851.8125, 852.65
Linville · North Carolina VIPER
RFSS 2 · Site 56 (hex 38) · NAC 1F0 · about 7 mi away
Control 774.16875, 774.70625
Voice 770.55625, 771.13125, 771.53125, 772.23125, 772.74375, 772.90625
Hawshaw #241 · North Carolina VIPER
RFSS 2 · Site 68 (hex 44) · NAC 1F0 · about 9 mi away
Control 773.93125, 774.21875
Voice 771.04375, 771.54375, 772.66875, 773.18125
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.