Skip to content

South Mills Police Frequencies

We do not have frequencies listed specifically for South Mills in Camden County, North Carolina yet. Countywide channels for Camden County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Pasquotank Correctional Institute (Pasquotank Correctional Institution), about 5 miles away.

About South Mills Police Frequencies

  • 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry law-enforcement traffic here: North Carolina VIPER: 3 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • 1 listed entry is marked encrypted. No scanner can decode encrypted audio.

Camden County channels that also cover South Mills

Dispatch

AgencyDescriptionFrequency (MHz)ToneModeFCC
Camden County SheriffCamden County Sheriff – Dispatch (Now on VIPER)460.3000
In 465.3000
110.9 PLFMNWPRJ594

Tactical

AgencyDescriptionFrequency (MHz)ToneModeFCC
Camden County SheriffCamden County Sheriff – Tactical Channel458.8500110.9 PLFMNWPRJ594

North Carolina VIPER

AgencyDescriptionTalkgroupHexMode
Camden County SheriffSheriffs Office355298ac9T
Camden County SheriffSheriffs Office Operations355308acaD
1 encrypted talkgroup (cannot be monitored)
AgencyDescriptionTalkgroupHexMode
Camden County SheriffSheriffs Office Tactical355128ab8D

Nearest trunked radio sites

Distances are measured from the center of South Mills.

Pasquotank Correctional Institute · Pasquotank Correctional Institution
Site 1 (hex 1) · about 5 mi away
Voice 453.2, 453.6, 453.9
South Mills · North Carolina VIPER
RFSS 3 · Site 60 (hex 3C) · NAC 1F1 · about 6 mi away
Control 852.6375, 853.675
Voice 851.075, 851.325, 851.8, 856.4375, 856.9375, 858.0625
Elizabeth City · North Carolina VIPER
RFSS 3 · Site 19 (hex 13) · NAC 1F0 · about 10 mi away
Control 853.5625, 857.0625
Voice 851.0625, 851.475, 851.9125, 852.65, 853.1, 854.3625
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency do the police use in South Mills?

We do not have a dispatch channel listed specifically for South Mills. County-level dispatch channels in the same county: Camden County Sheriff 460.3000 MHz (110.9 PL).