About Yanceyville Police Frequencies
- 5 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry law-enforcement traffic here: North Carolina VIPER: 4 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Yanceyville, start with the Yanceyville site of North Carolina VIPER, about 2 miles away. Its control channels: 852.8, 853.975 MHz.
- 4 listed entries are marked encrypted. No scanner can decode encrypted audio.
Caswell County channels that also cover Yanceyville
Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Caswell County Sheriff | Caswell County Sheriff – Dispatch | 453.3250 In 458.3250 | 167.9 PL | FM | KXV490 |
Talk-around & Car-to-Car
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Caswell County Sheriff | NC-DOC Mobile F | 42.5600 | 173.8 PL | FM | KNEB900 |
| Caswell County Sheriff | NC-DOC Mobile F | 42.8800 | 173.8 PL | FM | WPJZ935 |
| Caswell County Sheriff | Sheriff Mutual Aid | 453.7000 In 458.7000 | 167.9 PL | FM | KXV490 |
Jails & Corrections
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Caswell County Sheriff | NC-PRISON HT's | 154.6650 | 173.8 PL | FM | — |
North Carolina VIPER
4 encrypted talkgroups (cannot be monitored)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Caswell County Sheriff | Sheriffs Office | 9010 | 2332 | D Encrypted |
| Caswell County Sheriff | Sheriffs Office Investigations | 9001 | 2329 | D Encrypted |
| Caswell County Sheriff | Sheriffs Office Narcotics | 9002 | 232a | D Encrypted |
| Caswell County Sheriff | Sheriffs Office Operations | 9003 | 232b | D Encrypted |
Nearest trunked radio sites
Distances are measured from the center of Yanceyville.
Yanceyville · North Carolina VIPER
RFSS 1 · Site 65 (hex 41) · NAC 1F1 · about 2 mi away
Control 852.8, 853.975
Voice 851.225, 851.6875, 852.375
Pelham · North Carolina VIPER
RFSS 1 · Site 40 (hex 28) · NAC 1F1 · about 11 mi away
Control 853.125, 853.4375
Voice 851.3125, 851.875, 852.7
Hyco Lake · North Carolina VIPER
RFSS 1 · Site 71 (hex 47) · NAC 1F0 · about 14 mi away
Control 774.44375, 774.63125
Voice 770.09375, 771.30625, 772.18125, 773.70625
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency do the police use in Yanceyville?
We do not have a dispatch channel listed specifically for Yanceyville. County-level dispatch channels in the same county: Caswell County Sheriff 453.3250 MHz (167.9 PL).