Skip to content

Conover Police Frequencies

Conover in Catawba County, North Carolina has 0 conventional frequencies and 2 trunked talkgroups listed for local agencies. The closest trunked radio site we have is Riverbend Rd (North Carolina VIPER), about 6 miles away.

About Conover Police Frequencies

  • Trunked radio systems that carry law-enforcement traffic here: North Carolina VIPER: 2 talkgroups; North Carolina VIPER: 10 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Conover, start with the Riverbend Rd site of North Carolina VIPER, about 6 miles away. Its control channels: 852.2, 853.625 MHz.

Conover trunked talkgroups

North Carolina VIPER

North Carolina VIPER talkgroups
AgencyDescriptionTalkgroupHexMode
Conover PoliceConover Police – Dispatch95442548D
Conover PoliceConover Police – Operations95452549D

Catawba County channels that also cover Conover

North Carolina VIPER

North Carolina VIPER talkgroups
AgencyDescriptionTalkgroupHexMode
Catawba County SheriffSheriff's Office95212531D
Catawba County SheriffSwitchover95222532D
Catawba County SheriffLaw 59502251eD
Catawba County SheriffLaw 19515252bD
Catawba County SheriffLaw 29516252cD
Catawba County SheriffPolice Administration9517252dD
Catawba County SheriffCID95202530D
Catawba County SheriffNarcotics95232533D
Catawba County SheriffAdministration95242534D
Catawba County SheriffStar Team95252535D

Nearest trunked radio sites

Distances are measured from the center of Conover.

Riverbend Rd · North Carolina VIPER
RFSS 2 · Site 75 (hex 4B) · NAC 1F4 · about 6 mi away
Control 852.2, 853.625
Voice 851.1375, 851.4, 851.75, 854.2625, 856.1375, 858.1375
Simulcast · Hickory Public Safety
RFSS 1 · Site 1 (hex 1) · NAC 00C · about 8 mi away
Control 856.6375, 856.9375, 857.9375
Barrett Mtn · North Carolina VIPER
RFSS 2 · Site 5 (hex 5) · NAC 1F8 · about 11 mi away
Control 858.0375, 859.1375
Voice 851.2875, 852.3, 852.575, 853.05, 853.6625, 856.0375, 857.0375
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

Are Conover police talkgroups encrypted?

None of the 2 talkgroups listed for Conover are marked encrypted.