Skip to content

Poplar Branch Police Frequencies

We do not have frequencies listed specifically for Poplar Branch in Currituck County, North Carolina yet. Countywide channels for Currituck County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Currituck Simulcast (Currituck County), about 6 miles away.

About Poplar Branch Police Frequencies

  • Trunked radio systems that carry law-enforcement traffic here: Currituck County: 9 talkgroups; North Carolina VIPER: 4 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Poplar Branch, start with the Currituck Simulcast site of Currituck County, about 6 miles away. Its control channels: 854.1375, 854.3875, 854.6625 MHz.
  • 8 listed entries are marked encrypted. No scanner can decode encrypted audio.

Currituck County channels that also cover Poplar Branch

Currituck County

Currituck County talkgroups
AgencyDescriptionTalkgroupHexMode
All TalkgroupsFire / EMS Dispatch100012711D
8 encrypted talkgroups (cannot be monitored)
Currituck County encrypted talkgroups
AgencyDescriptionTalkgroupHexMode
All TalkgroupsAll Talkgroups – Dispatch210015209D Encrypted
All TalkgroupsDetention21002520aD Encrypted
All TalkgroupsCourt Security21003520bD Encrypted
All TalkgroupsOperations21004520cD Encrypted
All TalkgroupsOperations21005520dD Encrypted
All TalkgroupsNARC21006520eD Encrypted
All TalkgroupsNARC21007520fD Encrypted
All TalkgroupsAnimal Control210085210D Encrypted

North Carolina VIPER

North Carolina VIPER talkgroups
AgencyDescriptionTalkgroupHexMode
Currituck County SheriffCurrituck County Sheriff – Dispatch1400436b4D
Currituck County SheriffSheriff Special Operations1400936b9D
Currituck County SheriffSheriff Administration1400736b7D
Currituck County SheriffSheriff Investigations1400836b8D

Nearest trunked radio sites

Distances are measured from the center of Poplar Branch.

Currituck Simulcast · Currituck County
RFSS 1 · Site 1 (hex 1) · NAC C81 · about 6 mi away
Control 854.1375, 854.3875, 854.6625, 859.6875
Voice 856.2875, 859.1625
Barco · North Carolina VIPER
RFSS 3 · Site 3 (hex 3) · NAC 1F0 · about 10 mi away
Control 852.275, 853.3375
Voice 851.1375, 851.4375, 851.8375
Kitty Hawk · North Carolina VIPER
RFSS 3 · Site 34 (hex 22) · NAC 1F2 · about 15 mi away
Control 852.925, 853.4375
Voice 851.5375, 852.1, 852.4
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.