Skip to content

Bunnlevel Police Frequencies

We do not have frequencies listed specifically for Bunnlevel in Harnett County, North Carolina yet. Countywide channels for Harnett County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Erwin PE (North Carolina VIPER), about 6 miles away.

About Bunnlevel Police Frequencies

  • Trunked radio systems that carry law-enforcement traffic here: North Carolina VIPER: 12 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Bunnlevel, start with the Erwin PE site of North Carolina VIPER, about 6 miles away. Its control channels: 853.4375, 853.9875 MHz.
  • 1 listed entry is marked encrypted. No scanner can decode encrypted audio.

Harnett County channels that also cover Bunnlevel

North Carolina VIPER

North Carolina VIPER talkgroups
AgencyDescriptionTalkgroupHexMode
Harnett County SheriffHarnett County Sheriff – Dispatch2200455f4D
Harnett County SheriffHarnett County Sheriff – Dispatch2200555f5D
Harnett County SheriffSheriff Investigations2200655f6D
Harnett County SheriffHarnett County Sheriff – Tactical Channel2200855f8D
Harnett County SheriffSheriff Patrol2201055faD
Harnett County SheriffSheriff Patrol2201155fbD
Harnett County SheriffSheriff Patrol2201255fcD
Harnett County SheriffHarnett County Sheriff – Tactical Channel220165600D
Harnett County SheriffSheriff's Transport2201355fdD
Harnett County SheriffCourthouse2201455feD
Harnett County SheriffSheriff Office ICE2201555ffD
1 encrypted talkgroup (cannot be monitored)
North Carolina VIPER encrypted talkgroups
AgencyDescriptionTalkgroupHexMode
Harnett County SheriffSheriff NARC2200755f7D Encrypted

Nearest trunked radio sites

Distances are measured from the center of Bunnlevel.

Erwin PE · North Carolina VIPER
RFSS 1 · Site 20 (hex 14) · NAC 1F0 · about 6 mi away
Control 853.4375, 853.9875
Voice 851.4125, 852.175, 852.3875, 852.8875, 853.0875, 853.275
Lillington · North Carolina VIPER
RFSS 1 · Site 28 (hex 1C) · NAC 1F3 · about 6 mi away
Control 853.3375, 854.9875
Voice 851.0875, 851.3375, 851.5625, 852.0625, 852.475, 852.8375
Slocomb · North Carolina VIPER
RFSS 1 · Site 52 (hex 34) · NAC 1F1 · about 9 mi away
Control 858.0875, 858.7625
Voice 851.175, 851.45, 851.7375, 852.1375, 853.2375, 855.2375, 857.0625, 857.7625
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.