Skip to content

Jackson County Police Frequencies

Jackson County in North Carolina has 4 countywide conventional frequencies and 2 countywide talkgroups in our database. Use the list of 18 cities and communities below for local police departments.

About Jackson County Police Frequencies

  • 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • 2 conventional channels use a digital mode (NXDN96, DMR), which needs a scanner that decodes those modes.
  • Trunked radio systems that carry law-enforcement traffic here: North Carolina VIPER: 2 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Jackson County, start with the Toxaway Mtn site of North Carolina VIPER. Its control channels: 853.3375, 853.825 MHz.
  • 1 listed entry is marked encrypted. No scanner can decode encrypted audio.

Jackson County conventional frequencies

Dispatch

Dispatch frequencies for Jackson County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Jackson County SheriffJackson County Sheriff – Dispatch – NFM453.6250
In 458.6250
173.8 PLFMNWQCB500
Jackson County SheriffJackson County Sheriff – Dispatch – NXDN453.6250
In 458.6250
RAN 1NXDN96WQCB500
Western Carolina University PolicePolice Dispatch460.3750
In 465.3750
CC 14 · TG 1000 · SL 1DMR EncryptedKLC952

Talk-around & Car-to-Car

Talk-around & Car-to-Car frequencies for Jackson County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Western Carolina University PolicePolice/EMS Mutual Aid (Call Boxes)453.2500
In 458.2500
100.0 PLFMNWPWL734

Jackson County trunked talkgroups

North Carolina VIPER

North Carolina VIPER talkgroups
AgencyDescriptionTalkgroupHexMode
Jackson County SheriffLaw Enforcement2550463a0D
Jackson County SheriffJackson County Sheriff – Tactical Channel2550563a1D

Radio system sites in Jackson County

Program the control channel first; your scanner finds the voice channels from it.

Toxaway Mtn · North Carolina VIPER
RFSS 2 · Site 66 (hex 42)
Control 853.3375, 853.825
Voice 852.5375, 852.875, 855.4625
Sylva/Jackson Co Airport · North Carolina VIPER
RFSS 2 · Site 82 (hex 52)
Control 853.15, 853.8875
Voice 851.3, 852.3875, 852.6375
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Jackson County

Common questions

What frequency do the police use in Jackson County?

Dispatch channels listed for Jackson County: Jackson County Sheriff 453.6250 MHz (173.8 PL); Jackson County Sheriff 453.6250 MHz (RAN 1); Western Carolina University Police 460.3750 MHz (CC 14 · TG 1000 · SL 1).

Are Jackson County police talkgroups encrypted?

None of the 2 talkgroups listed for Jackson County are marked encrypted.