Skip to content

Deep Run Police Frequencies

We do not have frequencies listed specifically for Deep Run in Lenoir County, North Carolina yet. Countywide channels for Lenoir County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Seven Springs (North Carolina VIPER), about 8 miles away.

About Deep Run Police Frequencies

  • Trunked radio systems that carry law-enforcement traffic here: Lenoir County/Jones County: 2 talkgroups; North Carolina VIPER: 2 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Deep Run, start with the Seven Springs site of North Carolina VIPER, about 8 miles away. Its control channels: 853.6625, 853.9125 MHz.

Lenoir County channels that also cover Deep Run

Lenoir County/Jones County

AgencyDescriptionTalkgroupHexMode
Lenoir County SheriffSheriff Main276216be5D
Lenoir County SheriffSheriff Bailiff276266beaD

North Carolina VIPER

AgencyDescriptionTalkgroupHexMode
Lenoir County SheriffCounty Law275036b6fD
Lenoir County SheriffCounty Tactical275056b71D

Nearest trunked radio sites

Distances are measured from the center of Deep Run.

Seven Springs · North Carolina VIPER
RFSS 3 · Site 59 (hex 3B) · NAC 1F0 · about 8 mi away
Control 853.6625, 853.9125
Voice 851.45, 851.9125, 853.1875
Lenoir Simulcast · Lenoir County/Jones County
RFSS 1 · Site 3 (hex 3) · NAC 863 · about 8 mi away
Control 858.4625, 858.9625
Voice 854.1375, 854.6625, 856.4625, 856.9625, 857.4625, 857.9625
Kornegay · North Carolina VIPER
RFSS 3 · Site 35 (hex 23) · NAC 1F0 · about 10 mi away
Control 852.95, 853.6375
Voice 851.075, 852.25, 852.725
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.