Skip to content

Crouse Police Frequencies

We do not have frequencies listed specifically for Crouse in Lincoln County, North Carolina yet. Countywide channels for Lincoln County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Lincolnton (North Carolina VIPER), about 6 miles away.

About Crouse Police Frequencies

  • Trunked radio systems that carry law-enforcement traffic here: North Carolina VIPER: 7 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Crouse, start with the Lincolnton site of North Carolina VIPER, about 6 miles away. Its control channels: 774.45625, 774.89375 MHz.

Lincoln County channels that also cover Crouse

North Carolina VIPER

AgencyDescriptionTalkgroupHexMode
Lincoln County SheriffLincoln Sheriff280046d64D
Lincoln County SheriffLincoln Sheriff's Office Adam280126d6cD
Lincoln County SheriffLincoln Sheriff's Office Baker280136d6dD
Lincoln County SheriffLincoln Sheriff's Office Charlie280146d6eD
Lincoln County SheriffLincoln Sheriff's Office Court280166d70D
Lincoln County SheriffLincoln Sheriff's Office Denver280226d76D
Lincoln County SheriffPrisoner Transport280386d86T

Nearest trunked radio sites

Distances are measured from the center of Crouse.

Lincolnton · North Carolina VIPER
RFSS 2 · Site 95 (hex 5F) · NAC 1F0 · about 6 mi away
Control 774.45625, 774.89375
Voice 769.53125, 770.03125, 771.10625, 771.38125, 772.35625, 772.60625, 773.21875, 774.18125
Gastonia Simulcast · Charlotte UASI
RFSS 1 · Site 10 (hex A) · NAC 2DA · about 11 mi away
Control 851.7375, 852.65, 852.875, 853.4625
Voice 851.3375, 854.0875, 856.6875, 858.0625
Gaston Simulcast · North Carolina VIPER
RFSS 2 · Site 53 (hex 35) · NAC 1F3 · about 13 mi away
Control 772.93125, 773.98125, 853.375, 853.95
Voice 770.29375, 770.86875, 771.15625, 771.90625, 851.725, 852.1, 852.6, 853.1375
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.