Skip to content

Ophir Police Frequencies

We do not have frequencies listed specifically for Ophir in Montgomery County, North Carolina yet. Countywide channels for Montgomery County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Buck Mountain (North Carolina VIPER), about 5 miles away.

About Ophir Police Frequencies

  • 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry law-enforcement traffic here: North Carolina VIPER: 8 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Ophir, start with the Buck Mountain site of North Carolina VIPER, about 5 miles away. Its control channels: 774.31875, 774.59375 MHz.

Montgomery County channels that also cover Ophir

Tactical

AgencyDescriptionFrequency (MHz)ToneModeFCC
Montgomery County SheriffAnimal Control Dispatch/Operations154.0250FMWNHI736

North Carolina VIPER

AgencyDescriptionTalkgroupHexMode
Montgomery County SheriffSheriffs Office315097b15D
Montgomery County SheriffMontgomery Police315107b16D
Montgomery County SheriffMontgmery Police Tactical315117b17D
Montgomery County SheriffMontgomery Administration315137b19D
Montgomery County SheriffSheriffs Offcie Jail315147b1aD
Montgomery County SheriffSheriffs Office Survelliance315157b1bD
Montgomery County SheriffSheriffs Office Tactical315167b1cD
Montgomery County SheriffMontgomery Police Administration315367b30D

Nearest trunked radio sites

Distances are measured from the center of Ophir.

Buck Mountain · North Carolina VIPER
RFSS 4 · Site 7 (hex 7) · NAC 1F0 · about 5 mi away
Control 774.31875, 774.59375
Voice 769.35625, 770.18125, 771.28125, 771.88125, 772.30625
Biscoe · North Carolina VIPER
RFSS 4 · Site 5 (hex 5) · NAC 1F0 · about 13 mi away
Control 852.7125, 853.725
Voice 851.175, 851.7375, 851.9375, 852.375, 859.1875
Asheboro DOT · North Carolina VIPER
RFSS 4 · Site 3 (hex 3) · NAC 1F1 · about 16 mi away
Control 856.1875, 856.5375
Voice 851.1375, 851.3125, 851.95, 852.425, 852.9125, 853.5125, 853.8125, 858.8625
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.