Skip to content

Cameron Police Frequencies

We do not have frequencies listed specifically for Cameron in Moore County, North Carolina yet. Countywide channels for Moore County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Tramway VHF (Lee County), about 8 miles away.

About Cameron Police Frequencies

  • Trunked radio systems that carry law-enforcement traffic here: North Carolina VIPER: 11 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Cameron, start with the Tramway VHF site of Lee County, about 8 miles away. Its control channels: 151.4975, 154.2275, 154.4075 MHz.

Moore County channels that also cover Cameron

North Carolina VIPER

North Carolina VIPER talkgroups
AgencyDescriptionTalkgroupHexMode
Moore County SheriffSheriffs Office Dispatch320127d0cD
Moore County SheriffSandhills Community College Police320727d48D
Moore County SheriffSheriffs Office Administration320137d0dD
Moore County SheriffSheriffs Office Investigation320147d0eD
Moore County SheriffSheriffs Office Narcotics320157d0fD
Moore County SheriffSheriffs Office Patrol320167d10D
Moore County SheriffSheriffs Office SRT320177d11D
Moore County SheriffCounty Special320187d12D
Moore County SheriffSchool Resource Officers320197d13D
Moore County SheriffTraining320287d1cD
Moore County SheriffSheriffs Office Jail320297d1dD

Nearest trunked radio sites

Distances are measured from the center of Cameron.

Tramway VHF · Lee County
Site 1 (hex 1) · about 8 mi away
Control 151.4975, 154.2275, 154.4075, 155.55
Tramway UHF · Lee County
Site 2 (hex 2) · about 8 mi away
Control 453.8125
Voice 453.275, 460.1125, 460.58125
Carthage · North Carolina VIPER
RFSS 1 · Site 11 (hex B) · NAC 1F0 · about 8 mi away
Control 853.675, 855.5375
Voice 851.275, 851.6, 851.975, 852.55, 852.95, 853.1125, 853.325
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.