About Nash County Police Frequencies
- 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry law-enforcement traffic here: North Carolina VIPER: 14 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Nash County, start with the Nash DOC site of North Carolina VIPER. Its control channels: 773.74375, 774.24375 MHz.
- 2 listed entries are marked encrypted. No scanner can decode encrypted audio.
Nash County conventional frequencies
Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Nash Police | Nash Police | 155.5950 In 154.7100 | 186.2 PL | FMN | KIG566 |
Nash County trunked talkgroups
North Carolina VIPER
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Nash County Sheriff | Nash Sheriff | 32501 | 7ef5 | T |
| Nash County Sheriff | Nash Local Law Dispatch | 32547 | 7f23 | D |
| Nash County Sheriff | Nash Sheriff Patrol | 32502 | 7ef6 | T |
| Nash County Sheriff | Nash Tactical | 32507 | 7efb | T |
| Nash County Sheriff | Nash Tactical | 32529 | 7f11 | D |
| Nash County Sheriff | Nash Tactical | 32530 | 7f12 | T |
| Nash County Sheriff | Nash Sheriff Investigations | 32539 | 7f1b | D |
| Nash County Sheriff | Nash Sheriff Training | 32551 | 7f27 | D |
| Nash County Sheriff | Nash Sheriff Administration | 32538 | 7f1a | D |
| Nash County Sheriff | Nash Sheriff Common | 32546 | 7f22 | D |
| Nash County Sheriff | Nash Local Law Administration | 32548 | 7f24 | D |
| Nash County Sheriff | Nash Public Safety Emergency | 32550 | 7f26 | D |
2 encrypted talkgroups (cannot be monitored)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Nash County Sheriff | Nash Sheriff Narcotics | 32540 | 7f1c | D Encrypted |
| Nash County Sheriff | Nash Sheriff SRT | 32541 | 7f1d | D Encrypted |
Radio system sites in Nash County
Program the control channel first; your scanner finds the voice channels from it.
Nash DOC · North Carolina VIPER
RFSS 1 · Site 35 (hex 23) · NAC 1F3
Control 773.74375, 774.24375
Voice 770.51875, 771.16875, 771.44375, 772.11875, 772.69375, 772.94375
Rocky Mount · North Carolina VIPER
RFSS 3 · Site 53 (hex 35) · NAC 1F1
Control 853.4375, 854.6375
Voice 851.425, 851.7875, 852.175, 852.4, 852.675, 852.8625
Rocky Mount Simulcast · Rocky Mount
RFSS 1 · Site 1 (hex 1) · NAC 8A1
Control 854.7125, 857.2625, 858.2625, 859.2625
Voice 854.1625, 856.2625, 856.7625, 857.7625, 858.7625, 859.7625
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Cities & communities in Nash County
Common questions
What frequency do the police use in Nash County?
Dispatch channels listed for Nash County: Nash Police 155.5950 MHz (186.2 PL).
Are Nash County police talkgroups encrypted?
2 of the 14 talkgroups listed for Nash County are marked fully or partly encrypted; a scanner cannot decode encrypted audio.