About Rocky Point Police Frequencies
- 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
- 1 conventional channel uses a digital mode (DMR), which needs a scanner that decodes that mode.
- Trunked radio systems that carry law-enforcement traffic here: North Carolina VIPER: 7 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Rocky Point, start with the Burgaw site of North Carolina VIPER, about 5 miles away. Its control channels: 852.35, 853.2375 MHz.
Pender County channels that also cover Rocky Point
Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Pender County Sheriff | Law Dispatch | 453.5500 In 458.5500 | 186.2 PL | FMN | KNAJ342 |
Talk-around & Car-to-Car
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Pender County Sheriff | Sheriff Backup Rptr | 155.8650 In 153.9650 | DMR | WNNK393 |
North Carolina VIPER
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Pender County Sheriff | County Law Dispatch | 36010 | 8caa | D |
| Pender County Sheriff | Sheriff Air Operations | 36000 | 8ca0 | D |
| Pender County Sheriff | County Law Tactical | 36011 | 8cab | D |
| Pender County Sheriff | Sheriff Special | 36012 | 8cac | D |
| Pender County Sheriff | Pender County Sheriff – Tactical Channel | 36018 | 8cb2 | D |
| Pender County Sheriff | Topsail Island Police Tactical | 36048 | 8cd0 | D |
| Pender County Sheriff | Sheriff Jail | 36016 | 8cb0 | D |
Nearest trunked radio sites
Distances are measured from the center of Rocky Point.
Burgaw · North Carolina VIPER
RFSS 3 · Site 9 (hex 9) · NAC 1F3 · about 5 mi away
Control 852.35, 853.2375
Voice 851.1, 851.425, 851.825
Scotts Hill · North Carolina VIPER
RFSS 3 · Site 57 (hex 39) · NAC 1F0 · about 11 mi away
Control 773.63125
Voice 769.55625, 770.10625, 771.23125, 771.78125, 772.30625, 772.93125, 773.38125
Wilmington Fredrickson Rd · North Carolina VIPER
RFSS 3 · Site 24 (hex 18) · NAC 1F0 · about 12 mi away
Control 853.125, 853.5875
Voice 851.125, 851.375, 851.6375, 851.8125, 852.0625, 852.1375, 852.325, 852.8125
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency do the police use in Rocky Point?
We do not have a dispatch channel listed specifically for Rocky Point. County-level dispatch channels in the same county: Pender County Sheriff 453.5500 MHz (186.2 PL).