Skip to content

Dobbins Heights Police Frequencies

We do not have frequencies listed specifically for Dobbins Heights in Richmond County, North Carolina yet. Countywide channels for Richmond County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Hamlet (North Carolina VIPER), about 3 miles away.

About Dobbins Heights Police Frequencies

  • Trunked radio systems that carry law-enforcement traffic here: North Carolina VIPER: 4 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Dobbins Heights, start with the Hamlet site of North Carolina VIPER, about 3 miles away. Its control channels: 852.6625, 853.7375 MHz.

Richmond County channels that also cover Dobbins Heights

North Carolina VIPER

AgencyDescriptionTalkgroupHexMode
Richmond County SheriffSheriffs Office39007985fD
Richmond County SheriffSheriff Operations390109862D
Richmond County SheriffSheriff Operations390119863D
Richmond County SheriffSheriff Operations390129864D

Nearest trunked radio sites

Distances are measured from the center of Dobbins Heights.

Hamlet · North Carolina VIPER
RFSS 4 · Site 22 (hex 16) · NAC 1F1 · about 3 mi away
Control 852.6625, 853.7375
Voice 851.15, 851.4375, 852.275, 854.0875
Rockingham DOT · North Carolina VIPER
RFSS 4 · Site 34 (hex 22) · NAC 1F0 · about 7 mi away
Control 773.70625, 774.13125
Voice 770.40625, 771.44375, 771.79375, 772.09375, 772.79375
Ellerbe · North Carolina VIPER
RFSS 4 · Site 15 (hex F) · NAC 1F1 · about 15 mi away
Control 852.575, 853.6875
Voice 851.375, 851.7125, 852.075, 857.9375, 858.4375
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.