About Robeson County Police Frequencies
- 5 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry law-enforcement traffic here: North Carolina VIPER: 11 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Robeson County, start with the Lumberton UNCTV site of North Carolina VIPER. Its control channels: 856.8375, 858.0125 MHz.
Robeson County conventional frequencies
Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Robeson County Sheriff | Sheriff 1 (Channel 2 T/A) | 453.5500 In 458.5500 | 85.4 PL | FMN | WPMA436 |
| Saint Pauls Police | Saint Pauls Police – Dispatch | 453.3750 In 458.3750 | 141.3 PL | FM | KNBG323 |
Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Robeson County Sheriff | Sheriff 5 (Channel 6 T/A) | 453.6000 In 458.6000 | 141.3 PL | FMN | KVN824 |
| Robeson County Sheriff | Sheriff 7 (Channel 6 T/A) | 460.4000 In 465.4000 | 85.4 PL | FMN | WQGE401 |
| Robeson County Sheriff | Sheriff 3 (Channel 4 T/A) | 460.5250 In 465.5250 | 141.3 PL | FMN | KVN824 |
Robeson County trunked talkgroups
North Carolina VIPER
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Robeson County Sheriff | Robeson Small Towns | 39507 | 9a53 | D |
| Robeson County Sheriff | Sheriffs Office Dispatch | 39513 | 9a59 | D |
| Robeson County Sheriff | Saint Pauls Police Dispatch | 39590 | 9aa6 | D |
| Robeson County Sheriff | Sheriffs Office Narcotics | 39516 | 9a5c | D |
| Robeson County Sheriff | Sheriffs Office Patrol | 39517 | 9a5d | D |
| Robeson County Sheriff | Sheriffs Office SRT | 39518 | 9a5e | D |
| Robeson County Sheriff | Sheriffs Office Tactical | 39525 | 9a65 | D |
| Robeson County Sheriff | Sheriffs Office Tactical | 39526 | 9a66 | D |
| Robeson County Sheriff | Sheriffs Office Tactical | 39527 | 9a67 | D |
| Robeson County Sheriff | Sheriffs Office Administration | 39514 | 9a5a | D |
| Robeson County Sheriff | Sheriffs Office Investigations | 39515 | 9a5b | D |
Radio system sites in Robeson County
Program the control channel first; your scanner finds the voice channels from it.
Lumberton UNCTV · North Carolina VIPER
RFSS 3 · Site 39 (hex 27)
Control 856.8375, 858.0125
Voice 851.6125, 852.125, 852.4125, 853.1875, 853.9125, 854.0375, 856.2375
Proctorville · North Carolina VIPER
RFSS 3 · Site 52 (hex 34) · NAC 1F0
Control 852.975, 853.825
Voice 851.375, 851.7125, 852.575
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Cities & communities in Robeson County
Common questions
What frequency do the police use in Robeson County?
Dispatch channels listed for Robeson County: Robeson County Sheriff 453.5500 MHz (85.4 PL); Saint Pauls Police 453.3750 MHz (141.3 PL).
Are Robeson County police talkgroups encrypted?
None of the 11 talkgroups listed for Robeson County are marked encrypted.