Skip to content

Danbury Police Frequencies

We do not have frequencies listed specifically for Danbury in Stokes County, North Carolina yet. Countywide channels for Stokes County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Booth Mtn (North Carolina VIPER), about 2 miles away.

About Danbury Police Frequencies

  • Trunked radio systems that carry law-enforcement traffic here: North Carolina VIPER: 8 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Danbury, start with the Booth Mtn site of North Carolina VIPER, about 2 miles away. Its control channels: 853.5125, 856.5875 MHz.
  • 1 listed entry is marked encrypted. No scanner can decode encrypted audio.

Stokes County channels that also cover Danbury

North Carolina VIPER

AgencyDescriptionTalkgroupHexMode
Stokes County SheriffCountywide Law Enforcement Dispatch43004a7fcD
Stokes County SheriffStokes County Sheriff – Tactical Channel (all county agencies)43005a7fdD
Stokes County SheriffStokes County Sheriff – Tactical Channel (all county agencies)43006a7feD
Stokes County SheriffStokes County Sheriff – Tactical Channel (all county agencies)43007a7ffD
Stokes County SheriffStokes County Sheriff – Tactical Channel43008a800D
Stokes County SheriffStokes County Sheriff – Tactical Channel43009a801D
Stokes County SheriffSheriffs Office Patrol43014a806D
1 encrypted talkgroup (cannot be monitored)
AgencyDescriptionTalkgroupHexMode
Stokes County SheriffStokes Sheriff Narcotics43012a804D

Nearest trunked radio sites

Distances are measured from the center of Danbury.

Booth Mtn · North Carolina VIPER
RFSS 4 · Site 6 (hex 6) · NAC 1F0 · about 2 mi away
Control 853.5125, 856.5875
Voice 851.175, 851.725, 852.0875, 852.45
Sandy Ridge · North Carolina VIPER
RFSS 4 · Site 36 (hex 24) · NAC 1F2 · about 9 mi away
Control 853.75, 859.7375
Voice 851.375, 851.775, 852.3125, 852.725
Sauratown Mtn · North Carolina VIPER
RFSS 4 · Site 37 (hex 25) · NAC 1F0 · about 9 mi away
Control 854.3625, 855.7375
Voice 851.3, 851.6125, 852.3, 852.9625, 853.45
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.