Skip to content

Mulberry Police Frequencies

We do not have frequencies listed specifically for Mulberry in Wilkes County, North Carolina yet. Countywide channels for Wilkes County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Rendezvous Mtn (North Carolina VIPER), about 9 miles away.

About Mulberry Police Frequencies

  • 5 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry law-enforcement traffic here: North Carolina VIPER: 6 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Mulberry, start with the Rendezvous Mtn site of North Carolina VIPER, about 9 miles away. Its control channels: 857.1875, 858.0875 MHz.

Wilkes County channels that also cover Mulberry

Dispatch

AgencyDescriptionFrequency (MHz)ToneModeFCC
Wilkes County SheriffWilkes County Sheriff154.7550
In 158.7900
503 DPLFMWPOX598
Wilkes County SheriffWilkes County Sheriff Dispatch155.6100
In 154.8300
151.4 PLFMWPOX598

Talk-around & Car-to-Car

AgencyDescriptionFrequency (MHz)ToneModeFCC
Wilkes County SheriffWilkes County Animal Control152.3750
In 157.7700
146.2 PLFMWPPH242
Wilkes County SheriffWilkes County Sheriff Mutual Aid154.8750151.4 PLFMKNGE719
Wilkes County SheriffWilkes County Animal Control157.6350146.2 PLFMWPPH242

North Carolina VIPER

AgencyDescriptionTalkgroupHexMode
Wilkes County SheriffWilkes County Sheriff Patrol49509c165D
Wilkes County SheriffWilkes County Sheriff49510c166D
Wilkes County SheriffWilkes Community College Police Dispatch49590c1b6D
Wilkes County SheriffWilkes County Sheriff Administration49506c162D
Wilkes County SheriffWilkes County Sheriff INV49507c163D
Wilkes County SheriffWilkes County Sheriff NARC49508c164D

Nearest trunked radio sites

Distances are measured from the center of Mulberry.

Rendezvous Mtn · North Carolina VIPER
RFSS 4 · Site 32 (hex 20) · NAC 1F0 · about 9 mi away
Control 857.1875, 858.0875
Voice 853.5, 854.4625, 854.6625, 856.0875
Pores Knob · North Carolina VIPER
RFSS 4 · Site 31 (hex 1F) · NAC 1F0 · about 12 mi away
Control 852.7625, 853.75
Voice 770.04375, 771.25625, 771.50625, 771.93125, 851.25, 851.8625
Green Mtn · North Carolina VIPER
RFSS 4 · Site 20 (hex 14) · NAC 1F0 · about 14 mi away
Control 852.975, 853.5875
Voice 851.3875, 851.8875, 852.5625, 855.7875
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency do the police use in Mulberry?

We do not have a dispatch channel listed specifically for Mulberry. County-level dispatch channels in the same county: Wilkes County Sheriff 154.7550 MHz (503 DPL); Wilkes County Sheriff 155.6100 MHz (151.4 PL).