About Plumer Police Frequencies
- 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
Divide County channels that also cover Plumer
Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Divide County Sheriff | Divide County Sheriff – Dispatch | 158.9400 In 154.8000 | FMN | WCB572 |
Nearest trunked radio sites
Distances are measured from the center of Plumer.
Crosby · North Dakota Statewide Interoperable Radio Network (SIRN 20/20)
RFSS 0 · Site 213 (hex D5) · about 9 mi away
Voice 851.9375, 852.2125, 852.4375
Alamo · North Dakota Statewide Interoperable Radio Network (SIRN 20/20)
RFSS 1 · Site 47 (hex 2F) · NAC A6E · about 12 mi away
Control 852.0375, 852.2625
Voice 851.7625
Fortuna · North Dakota Statewide Interoperable Radio Network (SIRN 20/20)
RFSS 1 · Site 21 (hex 15) · NAC A64 · about 18 mi away
Control 852.1875, 852.4125
Voice 851.9125
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency do the police use in Plumer?
We do not have a dispatch channel listed specifically for Plumer. County-level dispatch channels in the same county: Divide County Sheriff 158.9400 MHz.