About Walshville Police Frequencies
- 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
- 1 conventional channel uses a digital mode (P25), which needs a scanner that decodes that mode.
- Trunked radio systems that carry law-enforcement traffic here: North Dakota Statewide Interoperable Radio Network (SIRN 20/20): 1 talkgroup. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Walshville, start with the Grand Forks Metro Simulcast site of North Dakota Statewide Interoperable Radio Network (SIRN 20/20), about 17 miles away. Its control channels: 853.1875, 853.4125 MHz.
- 1 listed entry is marked encrypted. No scanner can decode encrypted audio.
Walsh County channels that also cover Walshville
Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Walsh County Sheriff | Sheriff 1 Dispatch | 151.4600 | NAC 788 | P25 | KAD906 |
Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Walsh County Sheriff | Grafton Police | 154.8450 In 155.7300 | 192.8 PL | FMN | KSZ765 |
North Dakota Statewide Interoperable Radio Network (SIRN 20/20)
1 encrypted talkgroup (cannot be monitored)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Walsh County Sheriff | County Sheriff Dispatch | 50101 | c3b5 | T Encrypted |
Nearest trunked radio sites
Distances are measured from the center of Walshville.
Grand Forks Metro Simulcast · North Dakota Statewide Interoperable Radio Network (SIRN 20/20)
RFSS 1 · Site 4 (hex 4) · NAC A63 · about 17 mi away
Control 853.1875, 853.4125
Voice 852.6875, 852.9125
Larimore · North Dakota Statewide Interoperable Radio Network (SIRN 20/20)
RFSS 1 · Site 117 (hex 75) · about 24 mi away
Control 853.6875
Voice 853.2375, 853.4625
Fordville · North Dakota Statewide Interoperable Radio Network (SIRN 20/20)
RFSS 1 · Site 111 (hex 6F) · about 24 mi away
Control 853.7875
Voice 853.3375, 853.5625
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency do the police use in Walshville?
We do not have a dispatch channel listed specifically for Walshville. County-level dispatch channels in the same county: Walsh County Sheriff 151.4600 MHz (NAC 788).